Give Your Home a Facelift: Here’s How

You can give your home a whole new look by applying a cement or polymer render that is designed especially for Australia’s various weather extremes. Find a specialist who is well-versed in the rendering process and who offers a broad range of finishes and colours. If applied correctly, a render should last at least ten years, if not more.

Acrylic Rendering

One of the popular renders is an acrylic cement application. This type of render is less likely to crack because of its flexibility. The application is extremely attractive and can be added in various ways to create a variety of styles and finishes. Finishes are available that are predominantly textured or smooth. Renders of the acrylic type can be added to paint or concrete. The render only needs to be added once and does not necessitate painting.

Rendering Materials

Regardless of the render you use, the surface, whether brick, concrete block, or clay, should be free from contaminants such as dust, dirt, oil, silicone, salt, efflorescence, mud, droppings or any flaking or loose materials. The tools used for rendering include a trowel, polystyrene float, straight edge, plastic floats, power mixer, sponge, drop sheeting, and masking tape.

A coating system in the form of an acrylic dry render is a cement-based polymer modified render that contains graded and washed fine- or medium-coarse sand, acrylic powder, and other additives. A general-purpose render in Melbourne is suitable for both interior and exterior wall coating and patching needs.

When to Apply the Coating

Before you apply any render, you need to check the local weather conditions. This kind of application should be made at a substrate and ambient temperature of between 10 degrees and 30 degrees centigrade, or when the temperature is about five degrees above the dew point. The coated area should be safeguarded from damage until the end of the project. The finished work, in turn, should be protected from such outside elements as frost, rain, or severe weather until it is entirely dry.

Any use of rendering products must be done with the necessary precautions. For example, it is important to avoid inhaling the dust of the render or any cement-based material. In order to play it safe, wear a respiratory protection mask and avoid making contact with the applied concrete. Workers who render surfaces wear protective-type clothing to reduce skin contact and wear goggles to protect the eyes.

Matching the Coating with the Architecture

In order to receive the results you want, you need to work with a contractor who is experienced in this area of the cement plastering process. Therefore, you need to obtain the services of someone who is knowledgeable about how the coating should be correctly applied so that it conveys the best appearance. Match the coating with the architectural style of your house. Rendering can also extend to the decorative elements in the architecture.

Think about the finished product. How do you want your house to look? Again, applications can be facilitated in textured or smooth finishes. You want the new facing to match well with the style of your home’s design. Therefore, make sure the finish and colour you select enhances the style and adds to the home’s overall aesthetics and value. Consult with an architect if required.

About lightspread_hmcsvc

View all posts by lightspread_hmcsvc →

Leave a Reply

Your email address will not be published. Required fields are marked *